Welcome to the official website of SEASTARS CORP.,LTD.
Solutions
-
Virtual Interactive Training Solution
2021-08-24
Developing equipment virtual maintenance training system based on Saisida can realize “Unified process, universal platform and data sharing”. The research of repeatability technology is avoided, the technical requirement for users is reduced greatly, and the degree of data reuse and sharing is improved remarkably. VIEW MORE
-
ARINC661 Record Display Control Library solution
2021-08-24
The Arinc 661 standard defines the interface standard between the user application (UA: User application) and the Cockpit display system (CDS: Cockpit DisplaySystem) , which realizes the loose coupling of display and control. Compared with the centralized integrated display control system, ARINC 661 architecture has better reusability and maintainability, can be used for different purposes and different models, Saves Development and verification time, and reduces development and maintenance cost. The system of Arinc 661 standard includes three entities: CDS, UA and the communication protocol between them. The communication protocol includes two parts: definition phase and operation phase. The system architecture for the Arinc 661 standard is shown in figure: VIEW MORE
-
Integrated Solution of aircraft system model simulation
2021-08-23
Many users are faced with the common problem of how to build a high-fidelity aircraft system simulator in the absence of real data, which can be used to construct an aircraft sequence trainer or a test bed for specific avionics equipment, in addition, they face stringent requirements such as trainer certification. In this scheme, COTS products are used to develop the avionics simulation system to meet the application requirements. VIEW MORE
-
Hardware-in-the-loop simulation solution for aircraft wheel braking system
2021-08-23
Braking system is an important part of aircraft, which has strong time-varying and non-linear characteristics. The main function is to realize the safe, reliable, smooth and efficient braking under the condition of landing and taxiing or RTO (Reject Take Off) , and to ensure certain directional maneuverability of the aircraft. Generally include normal braking system (including automatic braking) , backup braking system and emergency/stop braking system, etc. . Common Brake Systems include wheel speed sensor, brake command sensor, (automatic brake selector) , anti-skid Brake Control Unit, electro-hydraulic Servo Valve, hydraulic safety, shuttle Valve SHV, pressure sensor PT, wheel and brake device. VIEW MORE
-
Solution of simulation environment in Avionics test system
2021-08-23
In the process of design, development and test of avionics airborne equipment, it is necessary to have the support of simulation technology: Using simulation technology, the system prototype can be constructed quickly according to the system design scheme, and the design scheme can be verified; Using the simulation results, the product can be debugged in the system development phase, and the sub-system can be simulated and tested when the system development progress is not consistent. VIEW MORE
-
Solution of radar sonar signal processing
2021-08-23
the target, then through the signal processing and operation to estimate the direction of the target, distance and speed, to achieve positioning and tracking. VIEW MORE
-
Solution of aero-engine hardware-in-the-loop simulation test system
2021-08-23
In the design and development phase of aero-engine, the measurement and control system based on real-time simulation computer is often used as the core part of the engine tester to optimize the previous design, this scheme can not only realize the synchronous acquisition and simulation of high precision real-time pressure signal, temperature signal, vibration signal, speed signal, incremental encoder signal, thermocouple signal, switch signal, RVDT/LVDT signal, etc. , the on-site electro-hydraulic Servo Valve, electric converter, flow control valve and on-off solenoid valve are regulated and controlled by means of scale transformation, filter processing and engine mathematical model calculation in the controller, and through communication with each field motor frequency converter real-time control, data interaction, and output temperature, speed, vibration, differential pressure and other simulation signals to the engine control unit, to achieve the system’s closed-loop control. VIEW MORE
-
Signal Processing Solution for UAV
2021-08-23
The rapid development and widespread use of drones came after the Gulf War. Western countries, led by the United States, fully recognize the role of unmanned aerial vehicles (uavs) in the war, and compete to apply high and new technologies to the development of uavs: New airfoils and light materials greatly increase the duration of uavs; Signal Processing and communication technology are used to improve the speed of image transmission and digital transmission, among them, multi-sensor signal processing and data fusion technology has become the core of current UAV technology research and development and technical breakthrough. VIEW MORE
-
High-speed data acquisition and storage playback system solution
2021-08-23
With the rapid development of Information Science, data acquisition and storage technology has been a very important link in digital signal processing, it is widely used in radar, communications, remote sensing, biomedicine, environmental detection and other fields. It has become an important means for people to obtain external information, realize hardware-in-the-loop simulation and algorithm analysis, and play back real signals collected on the spot. High-speed data acquisition, storage and playback system has been widely used in aviation, aerospace, ship, electronics, weapons and other defense departments. In order to meet the needs of rapid technological development, the data acquisition frequency and precision, multi-channel data synchronous acquisition, system communication bandwidth, storage speed, continuous storage time, multi-channel real-time storage and reliability, large capacity storage data management, etc. VIEW MORE
-
C4ISR solution based on 10-gigabit Ethernet and RapidIO
2021-08-23
C4ISR is an acronym for command, control, communications, computer, intelligence, and surveillance and reconnaissance. The C4ISR system is a man-machine system which combines the technology of computer with the commanding personnel to command and control the troops and weapons. In the 1950s command automation was called the C2(command and control) system. In the 1960s, with the development of communication technology, C3(command, control and communication) system was formed by adding “Communication”to the system. In 1977, the United States first “Intelligence”as an indispensable element of command automation, and with the C3 system, the formation of C3i (command, control, communications and intelligence) system. Later, due to the increasing role of computers in the system, command automation was added “Computer”, into a C4I (command, control, communication, computer and intelligence) system. In recent years, continuous local wars have made people realize the importance of mastering battlefield situation, and put forward the concept of “Battlefield perception”, therefore, the C4I system has further evolved into a C4ISR (command, control, communication, computer and intelligence, surveillance, reconnaissance) system which includes “Surveillance”and “Reconnaissance”. VIEW MORE
-
Simulation Solution of infrared guidance system
2021-08-23
Infrared guidance system simulation, based on real material self-radiation/thermal reflection characteristics, based on real atmospheric heat conduction transmission, interference, correction modeling, to achieve 0.2 ~ 25.0 μm arbitrary photoelectric/infrared signal simulation generation, storage and output display, support for custom modeling of electro-optical/infrared sensors, support for extended development of User’s atmospheric thermal conductivity algorithm, and build a virtual complex battlefield environment for infrared guidance based on joint operation, it can effectively reduce the technical risk in the process of demonstration, development, shaping, training and use of infrared guidance equipment, shorten the time cycle, optimize the use process and improve the use efficiency of funds. VIEW MORE
-
Scheme of system operation simulation experiment
2021-08-23
Collaborative combat simulation experiment, taking the American VT mäk simulation product line as the core, carries on the distributed and virtual reality VR technology based on DIS/HLA/DDS data communication protocol, supports various real/semi-real systems high-speed access, the third-party simulation model is supported to simulate federate access, and the virtual-real integrated simulation experiment and situation display environment of LVC with high immersion and fidelity are constructed, based on the simulation experimental data, the combat effectiveness of the equipment and the whole combat effectiveness of the system are analyzed. VIEW MORE
-
Simulation scheme of infrared photoelectric multispectral imaging
2021-08-23
This program is designed for the design and development, modeling and simulation, simulation and training of infrared, night vision, photoelectric and radar sensors on various operational platforms, my company based on the real physical model of the infrared, radar modeling simulation software SensorFX, RadarFX as the basis for secondary development, the implementation of a number of successful cases. VIEW MORE
-
Equipment Support Simulation scheme based on Unity 3D
2021-08-23
Based on Unity3D equipment support simulation scheme and VT-MÄk distributed simulation tool, a joint operation simulation experiment environment is constructed to provide precise support requirements Based on Unity 3D, a highly immersive, interactive and deeply inspiring human-computer interactive maintenance support site is constructed. Users can make use of customized tool library tools through interactive peripherals, such as mouse, 3d mouse, data glove, etc. , to realize the effective interactive control with the 3D model of VR virtual equipment components, complete the whole process of equipment support and maintenance, and the system automatically records the maintenance and training process, and according to the standard support flow and evaluation standard, the system realizes the technical evaluation of the whole process of maintenance and the management of the trainees’training files, and satisfies the three-level training requirements and the actual maintenance support requirements of the base-level relay Foshan base. VIEW MORE
-
Scheme of individual soldier training simulation system
2021-08-20
For traditional land warfare and modern battlefield simulation of anti-terrorism, conflict, stability maintenance and urban street warfare, the company as a professional soldier combat simulation software DI-Guy in China as an agent, to provide a complete solution to the training and simulation system for individual and multiple soldiers, and to assist users in research and verification of Infantry Tactical Actions, cooperative tactics, and infantry-tank coordination, and also to simulate and verify officers and soldiers against large military equipment, for example, the maintenance of tanks, aircraft business processes, but also in the civil field to create a virtual fire, flood, car accidents and other emergencies, modeling and verification of residents emergency evacuation and fire fighting and other processes. VIEW MORE
-
Simulation scheme of UAV ground station
2021-08-20
Typical UAV systems usually include UAV (also known as autopilot) and its flight control systems, ground control systems, launch and recovery systems, payloads and data links. The ground station is an important part of UAV system, its main function is to monitor and control the UAV’s flight process, flight track, payload, communication link, etc. , and some of the failure to give a timely warning and take the corresponding diagnosis and treatment measures. The ground station is an integrated system, which includes real-time acquisition and analysis of telemetry data, regular transmission of remote control command, and dynamic display of flight status. VIEW MORE
-
Solution of navigation system simulation and verification environment
2021-08-20
In the modern war, the navigation technology has the irreplaceable status, the recent several local wars all indicated: “The navigation war”has become the modern war the important symbol. The 1998 war in Bosnia and Herzegovina, the 2001 U.S. military campaign in Afghanistan, and the 2003 U.S. British war in Iraq all used the precision-guided munition as their primary weapon. Various satellite navigation systems and integrated navigation systems based on modern navigation technology also play an important role in the navigation of space shuttle, spacecraft, ship and submarine. The aim of this project is to set up the simulation environment of navigation equipment laboratory test and verification, and to set up the database of simulation experiment. VIEW MORE
-
Urban and Forest Fire Suppression Simulation Program
2021-08-20
In the field of civil emergency relief, our company formed a complete set of solutions through research and development. Building fire simulation training system, in the laboratory environment, to build a realistic fire scene, train firefighters, commanders of fire skills, so as to quickly improve the fire fighting ability of fire brigade without actual combat. Through repeated simulation experiments, different emergency evacuation strategies and rescue strategies can be verified, so that expert knowledge base of fire fighting and rescue can be built, and pre-planning can be made before a large-scale disaster, it is suitable for public security, fire fighting, civil affairs, transportation, medical treatment, emergency management and other enterprises and departments. VIEW MORE
-
Avionics POP design and simulation tool chain system based on VAPS XT software
2021-08-20
The avionics system is characterized by large scale, many subsystems and complex task logic. The system design, system simulation and code implementation are not smooth. The tools are in a scattered state and can not connect well, the communication of information between different development tasks is mainly in the form of documents, so it is easy to make mistakes in the process of communication, and needs a lot of duplication of work. System testing must wait until the prototype can be completed, the project risk, long cycle. VIEW MORE
-
ARINC661 Airborne Display Control Library
2021-08-20
The ARINC661 standard defines the interface standard between the user application (UA: UserApplication) and the Cockpit display system (CDS: Cockpit DisplaySystem) , which realizes the loose coupling of display and control. Compared with the centralized integrated display control system, ARINC 661 architecture has better reusability and maintainability, can be used for different purposes and different models, saves development and Verification Time, and reduces development and maintenance cost. The system of Arinc 661 standard includes three entities: CDS, UA and the communication protocol between them. The communication protocol includes two parts: definition phase and operation phase. The system architecture for the Arinc 661 standard is shown in figure: VIEW MORE
Contact Us
14th Floor, Block A, China International Science & Technology Exhibition Center, 12 Yumin Road, Madian, Chaoyang District, Beijing